Issue link: https://www.e-digitaleditions.com/i/1197147
88 / January 2020 powderbulk.com Inline bullet magnet removes contaminants from pneumatic conveying lines 4JIT inline bullet magnet for pneu- matic conveying lines offers more portability and features with a 100 percent stainless steel, food-grade, two-part body. Unit is fastened together during operation with a tri-clover clamp. Unit operates leak- free at up to 130 psi and is capable of operation in explosive environ- ments. Unit's magnetic circuit is accessible for cleaning captured contaminants removed from dry powder and granular materials. Unit is installed ahead of process- ing equipment to protect machinery from tramp metal damage and at bulk loadout zones to ensure prod- uct purity. Unit is available for 3-, 4-, and 5-inch line sizes with cus- tom options available. Industrial Magnetics, Boyne City, MI 800-662-4638 www.magnetics.com Flow measuring system's measuring tolerance can be reduced to about 0.2 percent C-Lever flow measuring system and EVA HE controller can be used together for accurately measur- ing bulk materials without being impacted by different material densities, irregular material flows, or extreme friction. System uses a centripetal-force-based measuring technique to measure a bulk material as it passes across a radial-shaped sensor surface. System's measuring tolerance can thus be reduced to approximately 0.2 percent depend- ing on the application. System's con- troller can be connected to existing installations using any standard connections and updated online to allow use with any weighing system. System has a wide range of settings that can be saved via data logging. System startup, updates, and bug fixes are all carried out online. Sys- tem operation is simple using a 5.7- inch color display with touch screen and an intuitive interface. Rembe, Charlotte, NC 704-716-7022 www.rembe.us over without disassembling the feed screw. Feeder's asymmetric hopper design prevents bridging and plugging of sticky material, and its flexible wall liner is mas- saged at eight points, allowing a constant, accurate filling of the screw feed element. Feeder is equipped with an integrated gear- box for turndown ratios of up to 1-to-120. Schenck Process, Kansas City, MO 816-891-9300 www.schenckprocess.com