Issue link: https://www.e-digitaleditions.com/i/1212417
40 / March 2020 powderbulk.com Rotary airlock feeder valve available in two larger sizes Klean-In-Place II rotary airlock feeder valve is USDA approved and available in two new larger sizes, 14 and 16 inch. Valve is suitable for pet food, baking, chemical, paint, and powder coating applications. Valve has redesigned slide bars to provide maximum rotor support while it's pulled out during valve cleaning, sanitizing, and inspection. Valve incorporates a self-cleaning drive design, which eliminates complicated drive handles. Valve is available with round flanges and standard airlock options. Wm. W. Meyer & Sons, Libertyville, IL 847-918-0111 www.wmwmeyer.com Low-pressure dense-phase conveying system handles fragile materials E-finity low-pressure continuous dense-phase conveying system for fragile materials gently induces material through the conveying line in slug form. System is suitable for granules, pellets, and materials such as pet foods, cereals, nuts, grains, prills, and pelleted material. System has precise pressure monitoring and airflow corrections to ensure efficient operation under all conditions. System can use a single air source to operate two to three separate systems simultaneously, saving costs in equipment, installa- tion, operation, and maintenance. Schenck Process, Kansas City, MO 800-821-2476 www.schenckprocess.com/us Elbow's ceramic tile encasing handles highly abrasive materials Flat Back elbow for use in pneumatic conveying system lines is useful for handling highly abrasive materials, including cement, fly ash, and aggre- gates and for high-heat applications. Elbow features ½- to 1-inch-thick cast ceramic tiles encased on the elbow over the highest areas of wear or to any or all sides of the elbow. Elbow, whose life cycle can be up to 30 to 40 times that of a bare steel elbow, is fabricated from a standard bend, eliminating the need for transitions that cause turbulence and wear. Elbow can be fabricated in nearly any size or degree. Progressive Products, Pittsburg, KS 888-235-1732 www.progressiveproductsinc.com Company's engineers use test data to design, install pneumatic conveying systems Company's engineers design and install pneumatic conveying systems to suit your bulk solids handling application. Company's testing facility reliably replicates your field conditions, allowing engineers to determine readings based on the system's rate, air consumption, material flow, material degradation, and more, to provide full-scale production results. Company's engineers then analyze all test-run data to design a system precisely suited to your application. Nol-Tec Systems, Lino Lakes, MN 651-780-8600 www.nol-tec.com