Tablets & Capsules

TC0719

Issue link: https://www.e-digitaleditions.com/i/1138630

Contents of this Issue

Navigation

Page 27 of 67

26 July 2019 Tablets & Capsules idized bed processor (ACG Pharma Technologies, GPCG 1.1) using a top-spray technique that applied the coating solution onto the paracetamol with optimized coating parameters. To ensure complete coalescence, the researchers cured the resultant granules for approximately 24 hours in a tray dryer with a thermal treatment at 60°C. The percentage composition of coating solution ingredients is listed in Table 1. Formulating the tablets The researchers then used direct compression tech- niques to formulate the ODT tablets, as shown in Figure 2. The formulation contained the taste-masked parac- etamol granules, mannitol (Pearlitol 160 C), microcrystal- line cellulose (Avicel PH-105) as compression aid, and 3 percent w/w croscarmellose sodium (Ac-Di-Sol SD-711) as superdisintegrant. All ingredients were passed through a #40 sieve and mixed in a blender for 10 minutes. The selected lubricant (Alubra PG 100), flavor, sweetener, and silicon dioxide (SiO 2 ) were then sifted through a #60 sieve and added to the formulation. The researchers mixed the coated paracetamol and the ODT materials into a uniform blend and compressed the blend into tablets using 12-millimeter round punches. The prepared tablets were evaluated for in-process qual- ity parameters such as friability, hardness, disintegration, and dissolution. The percentage composition of tablet ingredients for the formulation is listed in Table 2. Conclusions While preparing taste-masked API granules, the researchers found that coating weight gain up to 25 per- cent w/w ECD-DBS dispersion yielded the most favorable results. The formulated tablets provided better sensory attributes compared to a commercially available formula- tion, as shown in Figure 3. As Figure 4 shows, the in vitro dissolution profile of the formulated tablet shows complete drug release in less than one hour, indicating no specific sustained barrier to drug release. The weight variation of Table 1 Preparation of ECD dispersion Ingredient Amount (grams) Solid (grams) Assumptions Aquacoat ECD 300 90 25 percent based on EC solids Plasticizer 22.5 22.5 Kollicoat IR 10 10 Water 484.17 484.17 Total coating solution 816.67 816.67 Figure 2 Preparation of taste-masked paracetamol ODT tablets Paracetamol + Avicel PH 105 + Pearlitol 160 C + Ac-Di-Sol SD 711 Blend 10 minutes, sieve (#40) Alubra PG 100 + Sucralose + Strawberry flavor + SiO 2 Sift (#60) Blend (10 minutes) Compress into tablets (12 millimeter) Table 2 Formulation of taste-masked paracetamol tablets S. No. Ingredient Percentage 1 Paracetamol granules (30 percent Aquacoat ECD+DBS) 69.15 2 Pearlitol 160 C 20.85 3 Avicel PH 105 4.10 4 Ac-Di-Sol SD-711 3.00 5 Silicon dioxide 0.30 6 Sucralose, micronized 0.50 7 Strawberry flavor 0.60 8 Alubra PG 100 1.50 Total 100 Figure 3 Taste-masking efficiency of test ODT formulation versus commercial formulation Marketed paracetamol ODT Test paracetamol ODT 0 1 2 3 4 Taste perception: 0 = bitter; 5 = not bitter

Articles in this issue

Archives of this issue

view archives of Tablets & Capsules - TC0719